OHAUS 7000 Series, Руководство по обслуживанию

Страница: 73 / 107

APPENDIX B COMMUNICATIONS
7000 Series T72XW Indicators Service Manual B-3 Ohaus Corporation www.ohaus.com
B.4 Continuos Output Mode
Printout string for g, kg, lb, oz units:
Field Weight space Unit space Stability space G/N/T Space
Length 8 1 3 1 1 1 1 1

The printout string has a fixed length of 17 characters.

Each Space field is a delimiting space used to separate the other fields.

The Weight field is 8 right justified characters. If the value is negative, the '
‐
' character is printed at
the immediate left of the most significant digit.

The Unit/Mode field is 3 left justified characters.

The Stability field is 1 character.

The G/N/T field is 1 character. 'G' is printed for a gross weight. 'N' is printed for a net weight.
Note: The Termination Characters Carriage Return and Line Feed are appended to the printout.
B.5 Standard Interface Command Set (SICS) Protocol
The T72XW terminal supports the OHAUS CORPORTATION Standard Interface Command Set
(MT-SICS), which is divided into four levels (0, 1, 2, 3), depending on the functionality of the
device. This terminal supports parts of levels 0 and 1:

MT-SICS level 0
– Command set for the simplest device.

MT-SICS level 1
– Extension of the command set for standard devices.
A feature of this interface is that the commands combined in MT-SICS level 0 and 1 are
identical for all devices. Both the simplest weighing device and a fully expanded weighing
workstation can recognize the commands of MT-SICS levels 0 and 1.
B.6 Version Number of the MT-SICS
Each level of the MT-SICS has its own version number, which can be requested with the
command I1 from level 0. This terminal supports:

MT-SICS level 0, version 2.2x (except the ZI command)

MT-SICS level 1, version 2.2x (except the D, DW and K commands)