4-18 Peripheral Equipment
101–1386–001
Edition 2
9. Connect one end of the modular telephone cord to the telephone jack.
10. Connect the other end of the modular cord to the jack labeled LINE on the back of
the modem.
Testing the Connection
After configuring and connecting the VP modem and the PC modem, place a test call
from the PC to the VP modem.
1. Make sure that the power is on and the terminal-emulation program is configured
correctly.
If the program supports dialing directories, you can program the server-modem
telephone number into a dialing directory.
2. Type ATDT, followed by the telephone number of the VP modem; for example,
ATDT5551212. Then press Return. If an access code for an outside line is required,
such as 9, type ATDT9,5551212, and press Return. (The comma tells the modem to
pause for 2 seconds before dialing the rest of the number.)
The modem goes off-hook and dials the number of the VP modem. When the VP
modem answers, you are prompted to press Return or to enter the VP manager
password to continue.
3. Enter the system manager password to verify that everything is working correctly.
4. To disconnect the PC modem, do one of the following:
-
Type the command +++, type ATH, and press Return.
-
Use the emulation-program disconnect command.
5. If the modem does not disconnect, verify the disconnect character (modem register
S2 and register S12). Refer to the Boca 14.4Kbps V32bis MODEM manual for
details.
