4-16 Peripheral Equipment
101–1386–001
Edition 2
AT&V
ACTIVE PROFILE:
B16 B1 B41 B60 E0 L2M1 N1 P Q1 V1 W0 X4 Y0 &A0 &C0 &D0 &G0 &J0 &K0 &Q0 &R1 &S0 &T4 &X0 &Y0
S00:001 S01:000 S02:043 S03:013 S04:010 S05:008 S06:002 S07:050 S08:002 S09:006
S10:014 S11:095 S12:050 S18:000 S25:005 S26:001 S36:007 S37:009 S38:020 S44:003
S46:002 S48:007 S49:008 S50:016 S97:030 S108:002 S109:062 S110:002
STORED PROFILE 0:
B16 B1 B41 B60 E0 L2M1 N1 P Q1 V1 W0 X4 Y0 &A0 &C0 &D0 &G0 &J0 &K0 &Q0 &R1 &S0 &T4 &X0
S00:001 S02:043 S06:002 S07:050 S08:002 S09:006 S10:014 S11:095 S12:050 S18:000 S25:005 S26:001 S36:007 S37:009
S38:020 S44:003 S46:002 S48:007 S49:008 S50:016 S97:030 S108:002 S109:062 S110:002
Figure 4-6. Remote SMT Modem Configuration.
Testing the Connection
After the VP modem and the remote SMT modem are connected, place a test call from
the remote SMT modem to the VP modem, as follows:
1. Turn on the power to the terminal and the modem.
2. On the terminal keyboard, type ATDT followed by the telephone number of the VP
modem; for example, ATDT5551234. Then press Return. If an access code, such as
9, is required for an outside line, type the command ATDT9,5551234 and press
Return. (The comma causes the modem to pause for 2 seconds before dialing the rest
of the number.)
The SMT modem goes off-hook and dials the number of the VP modem. When the
VP modem answers, you are prompted to press Return to continue or to enter the
system manager password. If either of these prompts is displayed, the modem
connection is working correctly at both ends.
3. Enter the system manager password to verify that everything is working correctly.
4. To disconnect from the VP modem, type +++ to alert the modem.
5. Type ATH and press Return to disconnect the modem.
6. If the modem does not disconnect, make sure that the disconnect character is correct
(modem-register S2 and register S12). Refer to the Boca 14.4Kbps V.32bis MODEM
manual for details.
