Setting Up Remote Terminals 4-9
101–1386–001
Edition 2
Connecting the VP Modem to the Octel Overture 250 Server
After configuring the modem, disconnect it from the terminal or PC and connect it to the
server. Refer to the Octel Overture 250 service manual, and do the following:
1. Connect one end of the modem cable (P/N 057–1325–000) to the MODEM
connector on the combination CPU–file (CCF) card. Refer to Figure 4-4 for the
location of the connector.
2. Connect the other end of the modem cable to the RS-232 connector of the back of the
modem. Refer to the documentation that came with your modem for the location of
this connector.
3. Connect one end of the modular telephone cord into the telephone jack.
4. Connect the other end of the modular telephone cord to the jack labeled LINE on the
modem.
5. Connect the power cord to the modem. Refer to the manual that came with your
modem for details.
