101–1386–001
Edition 2
SETTING UP SYSTEM
MANAGER TERMINALS
Overview
Use the procedures in this chapter to connect the terminal to the server, configure the
terminal parameters, start up the server, and configure the CPU serial channels. Octel
ships the Wyse 55ES terminal with its servers, but the following types of terminals will
also function.
-
Wyse 50 or HP 700/43
-
AT&T teletype 4425/5425
-
DEC VT102/220
If you are using a terminal other than the one shipped by Octel, you might need to make
some changes to the following procedures.
Meeting Cable Requirements
Octel provides a 25-foot (7.6 meter) cable to attach the SMT to the server. The SMT can
be located up to 50 feet from the server; however, for anything above 25 feet you must
provide your own cable. Refer to Table 2-1 for the correct cable part numbers.
2
