Setting Up Remote Terminals 4-11
101–1386–001
Edition 2
Connecting the VP Modem to the Octel Overture 350 Server
After configuring the modem, disconnect it from the terminal or PC and connect it to the
server. Refer to the Octel Overture 350 service manual, and do the following:
1. Insert the null-modem connector into the RS-232 connector on the modem.
2. Connect one end of the SMT cable to the other end of the null-modem connector.
3. Connect the other end of the SMT cable to J43, J44, or J46 on the main distribution
board of the server. Refer to Figure 4-5 for the location of the connectors.
4. Connect one end of the modular telephone cord into the telephone jack.
5. Connect the other end of the modular telephone cord to the jack labeled LINE on the
modem. Refer to the manual that came with your modem for details.
6. Connect the power cord to the modem. Refer to the manual that came with your modem
for details.
