Oceanic SAMM, Руководство пользователя

Страница: 88 / 94

SAMM User Manual
86
As before, launch SAMM, create a project and select some FLS data for playback. Commence
playback, and make sure the PPI window is open.
1. Look for something interesting in your Forward Look window PPI. Double-click on it.

A small blue tack appears in the corresponding location in the mosaic window.
2. Mark three more targets in the same manner.
3. Click the
Contact icon.

The Contacts window opens. Not all elements of the Contacts window are visible yet.
4. Click on the Contact_0 thumbnail.

The contact displays in the contact view.
5. Click the Properties icon on the toolbar (mouse over the buttons to see the names.)

The properties table opens on the right side of the Contacts window.
6. Click the Measure Width icon on the toolbar. Click on the extreme edge of the widest
part of the target, drag the mouse to the opposite edge, and release the mouse button.

A blue line appears, representing the contact width.

The width field in the right panel displays the width in meters.
7. Measure the length and shadow length in the same manner. Measure the shadow in the
direction the shadow is cast. You can enter the altitude, if known, in the properties table
to calculate the height of the target.
8. Right-click on the contact icon and select Add contact(s) to staging table .

The staging table appears at the bottom of the Contacts window, with attribute
information in a tabular view.
9. Click on Contact_1 to select it. Hold Shift and click on Contact_3 to select the second,
third, and fourth contacts. Right-click and select Add contact(s) to staging table .

SAMM adds the contacts to the staging table. The Width (m), Length (m), and
Shadow Length (m) fields are blank for contacts that you have not measured.
10. Right-click on any of the field names. Uncheck Sensor Latitude and Sensor Longitude.

They are no longer displayed in the table. This works for any column.
11. Click on the Latitude column.

SAMM sorts the table by ascending latitude. This works for any column.
12. Click the Create report button. Enter a file name and set the file location and click Save .

SAMM exports an .html file with images.
13. Close the Contacts window.