Oce CS7075, Руководство пользователя

Страница: 143 / 182

Clean the Wiping Station 5-15
Clean the Wiping
Station
1. Open the wiping station door, remove the wiping station
cover, and scrape the cured ink with the scraper supplied
with the printer (or a putty knife) into a trash receptacle.
Cured ink is not hazardous waste. If uncured ink is present
on the cover, allow further printing to occur with the cover
in place to cure the ink.
2. Print with the wiping station cover removed to cure ink in the
wiping station.
3. Scrape cured ink out of the station (the wiping station cover
makes a good tray) and into a trash receptacle.
Do not scrape cured ink into the waste ink drain area.
4. Replace the wiping station cover.
5. Open the drain valve to drain uncured waste ink from the
bottom of the wiping station into an open container, and
allow it to cure before disposal.
6. Close the drain valve.