Oce CS7075, Руководство пользователя

Страница: 103 / 182

AutoJet 4-3
AutoJet
AutoJet detects individual inkjets that are misfiring or not firing
at all. During subsequent printing, the printer compensates for
these jets by using other jets in their place, ensuring maximum
print quality without reducing print speed.
You can also identify and map missing jets manually from the
Manual Calibrations menu (see “Manual Jet Mapping” on page
4-18). You may want to manually map weak or misdirected jets
that AutoJet does not detect and substitute.
To run AutoJet:
◆
Press the AutoJet button on the control panel Front Page
screen (see page 2-10), or
◆
Select AutoJet Calibration from the Auto Calibrations menu
(see “Auto Calibrations” on page 4-6), or
◆
Run AutoJet automatically with the AutoTune scheduler (see
“AutoTune” on page 4-4)
Note AutoJet does not work with transparent media, nor
with many translucent media. In this case, run Man-
ual Jet Mapping.
1. Press the AutoJet button from the Front Page screen or select
AutoJet from the Auto Calibrations menu.
The printer asks whether you want to perform a Purge oper-
ation. By recovering clogged printheads, you reduce the
number of jet substitutions required.
◆
Press

to initiate a Purge.
◆
Press

to skip the Purge.
2. The printer prints the AutoJet test pattern.
3. The printer reads the AutoJet test pattern and maps any miss-
ing jets to available working jets.
The control panel shows the progress of this operation as
the percentage completed.
4. The printer prints an AutoJet report.