Oce CS120, Справочное руководство

Страница: 229 / 268

Stapler Sorter-F2 5-49
.
Removing Paper Jams in the Stapler Sorter
If a paper jam occurs in the stapler sorter, a screen similar to the one shown below
appears on the touch panel display. Check the location of the paper jam, and using
the screen on the touch panel display as a reference, follow the procedure
described below to remove the jammed paper.
Paper can be jammed in the stapler sorter in the following two situations:
•
When outputting to the non-sort bin
•
When outputting to a sort bin
WARNING
.
•
There are high voltage areas inside the copier. Be careful not to let metallic
objects, such as necklaces or bracelets, come into contact with such areas
when you are removing jammed paper or otherwise inspecting the inside of the
copier. Failure to follow this precaution may result in burns or electrical shock.
CAUTION
.
•
When removing jammed paper, take care not to cut your hands on the edges of
the paper.
•
When removing paper which has become jammed inside the copier, take care
not to allow the toner on the jammed paper to come into contact with your
hands or clothes. If your hands or clothes become dirty, wash them immediately
with cold water. Washing with warm water will fix the toner and make it
impossible to remove later.
•
When removing jammed paper from inside the copier, be sure to remove it
gently to prevent the toner on the paper from scattering and entering your eyes
or mouth. If toner enters your eyes or mouth, wash immediately with cold water
and consult a physician.
NOTE
.
•
The screen that appears differs depending on the options attached.
Handling Options
5