Oce CS120, Справочное руководство

Страница: 116 / 268

Loading Paper 3-10
IMPORTANT
.
•
Adjusting the slide guides too tightly or too loosely may cause paper jams or cut-off the
image due to outputting of misaligned copies. When output is continued with the images
cut off using the print controller (optional), it may result in the back of the paper getting
dirty.
•
Note the following points when using the stack bypass:
- Copy quantity: 1 to approximately 250 sheets (20-lb bond (80 g/m
2
)),
1 to approximately 100 sheets (transparencies)
- Paper size: 12" x 18", 11" x 17", LGL, LTR, LTRR,
irregular size paper (7
3
/
16
" x 7
3
/
16
" to 12" x 18" (182 x 182 mm to 305 x
457 mm))
- Paper weight: 17-lb bond to 110-lb index (64 to 209 g/m
2
)
•
Curl down paper before use. There are some types of paper that may meet the above
specifications but cannot feed through the stack bypass.
•
Do not load paper of different sizes or types at the same time.
•
Only use transparencies that are specifically recommended for use with this copier.
Other transparencies may damage the copier.
•
Make sure to immediately remove transparencies or heavy paper that are output onto the
output tray. Failure to do so may result in paper jams.
NOTE
.
•
Refer to Chapter 2, “Useful Copy Functions,” in the Copying Guide for instructions on the
correct way to load transparencies in the stack bypass.
•
For high quality copies, use paper recommended by Canon.
.
1
Open the stack bypass.
Loading Paper and Refilling Consumables
3