Oce ColorStream, Руководство пользователя

Страница: 462 / 524

Proceed as follows:
On the left-hand side of the
printing system: Install the new
smoothing roller for the lower
print unit (soft smoothing roller
with red surface):
■
Insert the smoothing roller
carefully onto the swivel
levers.
■
Insert the bearing of the
smoothing roller into the
groove of the left swivel lever
(in paper path direction).
Press the bearing bolt on the
left-hand side upwards and
close the latch bolt.
■
Press the bearing bolt on the
right-hand side (in paper
path direction) upwards and
close the latch bolt.
3
2 1
2.
Caution
Do not damage the discharge brush
Ensure that you do not bend the discharge brush.
Insert the lower discharge brush
in the direction of the smoothing
roller, with the brush side facing
upwards:
■
First push the discharge
brush in on the right-hand
side (in paper path direction)
until it snaps in,
■
then snap the discharge brush
into place on the left-hand
side (in paper path direction).
3.
Chapter 9 - Replacing Expendables 462
Installing smoothing rollers