Oce ColorStream, Руководство пользователя

Страница: 336 / 524

Developer
Replacing the Developer - Overview
Caution:
■
Do not allow developer to get into eyes. In the event of contact with eyes, rinse eyes
out with plenty of water and seek medical attention.
■
Avoid contact with the skin. If the developer comes into contact with the skin, wash
with plenty of water.
■
Do not inhale developer. Avoid accumulation of dust. If after inhaling developer, you
experience symptoms such as nausea, headaches or dizziness, go out into the fresh air
immediately.
■
Do not spill developer. You can slip on spilled developer. Clean up developer spills
immediately.
■
Always use an industrial vacuum cleaner with a grounded suction tube, rubber nozzle
and filter set for fine dust. For larger quantities, the industrial vacuum cleaner must
be explosion proof.
■
Keep developer out of the reach of children and store it away from containers used
for food and drink.
Attention:
■
The developer can only be replaced when printing is stopped.
■
Only use approved developer (see ‘Order Numbers and Packing Units’ on page 313 ).
■
Only use original, sealed developer bottles secured by an intact band for refilling.
■
Do not re-use developer.
■
Always store developer in a cool (< 35°C/95°F), dry and well-ventilated space.
■
Never expose developer to direct heat (sunlight, heaters etc.)
■
Keep used developer ready for collection by Service or the contracted shipping com-
pany.
Overview
The printing system automatically detects the end of the developer's service life and displays
a warning on the operator panel. The procedure for replacing the developer is the same
for the upper and the lower print unit:
■
‘Draining the Developer Mixture’ on page 337
■
‘Fill in Developer’ on page 340
Chapter 8 - Replacing Consumables 336
Replacing the Developer - Overview