Oce ColorStream, Руководство пользователя

Страница: 42 / 524

Transportation, assembly and installation, repair
Transport
The printing system may only be transported by Service personnel or authorized transport
companies.
Assembly and installation
Observe the following instructions when assembling and installing the printing system:
■
The printing system may only be assembled and installed by Service personnel.
■
The printing system must have a dedicated electrical connection or type B plug con-
nection (complying with VDE directives, EN 60950).
■
Do not route the lines and cables in such a way that they can be trodden on or tripped
over.
■
A fume hood should be installed over the fuser module (without a security detector).
In very seldom cases, paper that has been caught in the fuser module will be damaged
by the infrared fusing and will begin to smoke. However, even in this case there is no
danger of fire because the affected component is immediately isolated from the remain-
ing printing system by sealed bulkheads. This bulkhead is part of a proven safety
concept and does not affect the availability of the printing system after the jammed
paper has been removed.
■
All printing system accessories and options must comply with statutory regulations
and directives for safety, electromagnetic compatibility, telecommunications terminal
devices as well as with the specifications published by Océ Printing Systems GmbH.
■
The installation of other accessories may constitute a violation of these requirements
and directives, and may also damage the printing system.
■
Consult Service personnel for details on which accessories and options are permitted
for the printing system.
■
With the exception of optical wave guide connections, all data, signaling, process,
measurement and control lines mapping the printing system with other devices must
be properly grounded.
■
Data transmission lines should neither be connected nor disconnected during electrical
storms.
Repairs
Repairs to the printing system must only be carried out by Service personnel. Access to
locked areas and areas which can only be opened with special tools is reserved for Service
personnel. Opening the device without authorization and improperly effected repairs
may put operators at considerable risk.
Chapter 2 - Safety 42
Transportation, assembly and installation, repair