Obihai OBi100, Руководство администратора

Страница: 83 / 220

Copyright 2010-2013 Obihai Technology, Inc. 83
where month=1-12, day=±(1-31), weekday=0,1-7 (0=special, 1=Monday,
7=Sunday), hh=0-23,mm=0-59,ss=0-59.
If weekday=0, daylight saving starts on the given month/day; otherwise it
starts on the weekday on or after the given month/day if day > 0, or on the
weekday on or before the last-day-of-given-month+day+1 (note that day = -1
equivalent to last day of the month).
:ss may be omitted if the value is 0; :mm:ss may be omitted if mm and ss are
both 0.
DaylightSavingTimeEnd Daylight Saving Time End Date. Same format as Start Date 11/1/7/2
DaylightSavingTimeDiff Amount of time to add to current time during Daylight Saving Time.
Format: [-]hh:mm:ss.
:ss may be omitted if it is 0; :mm:ss may be omitted if both are 0. 1
DNS Control
DNSQueryOrder When more than one DNS servers are available, the unit will attempt to
resolve a domain name by querying each server sequentially until a successful
result is received. The parameter controls the order in querying the servers.
Available choices are:
-
DNS Server1, DNS Server2, DHCP Offered DNS Servers
DHCP Offered DNS Servers, DNS Server1, DNS Server2
DNS Server1,
DNS Server2,
DHCP Offered
DNS Servers
DNSQueryDelay When more than one DNS servers are available, the unit will attempt to
resolve a domain name by querying each server sequentially until a successful
result is received. This parameter controls the number of seconds between
successive DNS query made by the unit for a given domain name. Choices are 0
– 5 (s) 2
Local DNS Records
N
where
N = 1 – 32
One of 32 Local DNS Records (numbered 1 – 32). Each record is a mini script of
the following format:
Name = A , A , A ,... OR
Name = R , R , R ,...
where
Name represents the domain name to be resolved locally, and has the
format prefix + domain (such as machine.sip+obihai.com ). Everything after
‘+’ is considered as the domain to be appended to the host field in each R on
the right hand side. ‘+’ is optional; if missing the full domain must be used in
every
R .
A represents an A record which is just an ip address, such as 192.168.12.17.
R represents an SRV record and has the format: { host : port , pri , wt } where
- host is a hostname with or without domain part (such as xyz, xyz.abc.com.). A
dot (.) at the end of host indicates it is a complete hostname that does not
require the domain to be appended.
-
port is a port number (such as 5060)
- pri is the priority. Valid value is 0(highest) – 65535(lowest)
- wt is the weight. Valid value is 0(lowest) – 65535(highest)
wt is optional; 1 is the default if not specified.
pri is optional only if wt is not specified; 1 is the default if not specified.
port is optional; the default to use will be based on the protocol (5060 for SIP,
80 for HTTP, etc.) .
The enclosing curly braces { } are also optional if there is only one
R ; or
if there is no comma used inside the R .
Examples:
_sip._udp+obihai.com=abc,xyz,pqr:5080,{mmm,2},{super.abc.com.}