Obihai OBi100, Руководство администратора

Страница: 27 / 220

Copyright 2010-2013 Obihai Technology, Inc. 27
Configuration and Management Interfaces of the OBi Device
Telephone-IVR-Based Local Configuration
The OBi utilizes an interactive voice response (IVR) system for both its configuration and day-to-day function. The IVR is, in
essence and automated attendant the OBi user will access to either invoke a verbal response from the OBi to provide
information to the user (such as IP address) or instruct the OBi to act on the routing / placement of a call to a particular
interface. More information about the Auto Attendant IVR for OBi call processing will be provided later in the document.
There are two IVR menus.
1. Auto Attendant IVR 1: Referred to as “aa” (or aa1) for call processing commands.
2. Auto Attendant IVR 2: Referred to as “aa2” for local configuration.
If settings require reboot, it will be done automatically when quitting the IVR.
IVR (AA2) invoked by *** as default.
Tip: By pressing the appropriate button sequence on the telephone key pad, you can barge into the next menu of the IVR
or invoke a command without first waiting for the previous announcement to end.
Main Menu configuration options are accessed by pressing * * * from a phone attached to the PHONE port of the OBi,
followed by a single digit of the option number as listed below:
Selection Announcement What Can You Do?
1
Basic Network Status
Your IP address and DHCP status will
be read back to you.
Press 0 to repeat the information.
2
Advanced Network Status
Your primary & back-up DNS server,
primary & back-up NTP server will be
read back to you.
Press 0 to repeat the information.
3
DHCP Current Value
Your current value will be read back to
you and you will be given the option to
change the value
Press 1 to enter a new value.
Press 2 to set the default value.
Press 0 to repeat the information.
4
IP Address Current Value
Your current value will be read back to
you and you will be given the option to
change the value. If you elect to enter
a new value (static IP address) DHCP
will be disabled.
Press 1 to enter a new value.
Press 2 to set the default value.
Press 0 to repeat the information.
5
Password Current Value
Your current IVR password value will
be read back to you and you will be
given the option to change the value.
Press 1 to enter a new value.
Press 2 to set the default value.
Press 0 to repeat the information.