Obihai OBi100, Руководство администратора

Страница: 149 / 220

Copyright 2010-2013 Obihai Technology, Inc. 149
switch from Off-Hook state to On-Hook state, and back to
Off-Hook state.
This parameter specifies the upper time limit in
milliseconds such that if the hook switch stays at the
intermediate On-Hook state for longer than this time
limit, the OBi device will not recognize the state transition
as a HOOK FLASH event, but instead as an ON HOOK
event followed by an OFF HOOK event
HookFlashTimeMin Hook Flash is a quick transition of the phone’s hook
switch from Off-Hook state to On-Hook state, and back to
Off-Hook state.
This parameter specifies the lower time limit in
milliseconds such that if the hook switch stays at the
intermediate On-Hook state for less than this time limit,
the OBi device will not recognize the state transition as a
HOOK FLASH event, but consider the hook switch remains
at Off-Hook state throughout the transition (in other
words, the transition is discarded as a glitch if it happens
too quickly) 100
DoubleHookFlashTimeMin Minimum time apart between two successive hook flash
events to be recognizable by the device as a double hook
flash event. The unit is in milliseconds.
This option is only available in OBi110 and devices with an
attached OBiLINE USB to FXO adapter. 100
DoubleHookFlashTimeMax Maximum time apart between two successive hook flash
events to be recognizable by the device as a double hook
flash event. The unit is in milliseconds.
This option is only available in OBi110 and devices with an
attached OBiLINE USB to FXO adapter. 700
CPCDelayTime A short delay in milliseconds before OBi generates a CPC
signal to the PHONE port after the far end has hung up
during a call 2000
CPCDuration OBi device generates CPC (Calling Party Control) Signal by
removing power from the PHONE port for a short period.
This parameter specifies the length of this period in
milliseconds. CPC signal tells the attached phone
equipment that the far end has ended the call 500
DigitMapLongTimer Value of the long inter-digit timer (in seconds) when
collecting dialed digits according to the DigitMap on this
phone port. This timer governs the timeout when one or
more patterns are partially matched or a variable length
pattern (that can accommodate one or more optional
digits) is matched.
Note: Option not available on OBi100/OBi110 (where the
long inter-digit timer is always 10s) 10
DigitMapShortTimer Value of the short inter-digit timer (in seconds) when
collecting dialed digits according to the DigitMap on this
phone port. This timer governs the timeout when a fixed
length pattern has been matched while one or more
other patterns can be potentially matched with more
input digits. 2