Obihai OBi100, Руководство администратора

Страница: 79 / 220

Copyright 2010-2013 Obihai Technology, Inc. 79
WiFi Settings Parameter Guide:
Parameter Description
Default
Setting
Basic Settings
Enable
Enable OBiWiFi feature. You must have an OBiWiFi dongle attached to the OBi
to use the feature
Yes
PreferredAccessPoint
Indicate which access point to use when more than one remembered AP are
in range. Select from the list: None, Access Point 1, Access Point 2, …, Access
Point 20.
This value is automatically populated with the last AP that OBi user chose to
connect explicitly from the device web page
None
ShowAccessPointPassword
Check this box and press submit to show all the AP passwords in (unmasked)
plain text (no reboot required). The passwords will be masked again following
a reboot of the device No
Internet Settings
AddressingType
The method to assign an IP address to this interface. Choose between DHCP or
Static DHCP
IPAddress The IP address to use if AddressingType = Static
SubnetMask The subnet mask to use if AddressingType = Static
DefaultGateway The default gateway to use if AddressType = Static
DNSServer1 An additional DNS Server to use in addition to the ones received from DHCP
DNSServer2 An additional DNS Server to use in addition to the ones received from DHCP
Access Point N
( N =1,2,…,20)
SSID SSID of the access point
Password
Password or pass-phrase based on the authentication method used by the AP.
For WPA, the pass-phrase should be no more than 64 characters. For WEP, the
password should be in one of the four formats: 10 HEX digits, 26 HEX digits, 5
ASCII characters, or 13 ASCII characters. The HEX digits can be upper or lower
case
SecurityEnabled This is a read only parameter. It indicates if the AP has security enabled or not