Obihai OBi100, Руководство администратора

Страница: 143 / 220

Copyright 2010-2013 Obihai Technology, Inc. 143
{sp2:(<**2>xx.)},
{sp3:(<**3>xx.)},
{sp4:(<**4>xx.)},
{pp:(<**9>xx.)}
PrimaryLine By primary line we mean the service that does not require
any access code prefix (such as **1 or **9) when dialing;
it is the default service to be used for making the call
when no explicit access code prefix is entered. This
parameter indicates to the device which voice service is
considered as the primary line when dialing out from the
PHONE port. Available choices are:
SP1 Service (
code = sp or sp1 )
SP2 Service ( code = sp2 )
SP3 Service ( code = sp3 )
SP4 Service ( code = sp4 )
OBiTALK Service ( code = pp or pp1 )
PSTN Line ( code=li1 )
OBiBlueTooth ( code = bt or bt1 )
OBiBlueTooth 2 ( code = bt2 )
Trunk Group 1 ( code = tg1 )
Trunk Group 2 ( code = tg2 )
The OBi device process the parameter by substituting of
the occurrences of
pli and (Mpli) in DigitMap,
OutboundCallRoute, and CallReturnDigitMaps with the
corresponding
code and (Mcode) . For example, if PrimaryLine = PSTN
Line , then all occurrences of pli and (Mpli) will be
substituted internally with li1 and (Mli1) respectively
Notes:
- SP3, SP4, BT1, and BT2 not available on
OBi100/OBi110
- PSTN Line not available on OBi100
- TG2 not selectable as Primary Line on OBi100/OBi110
For OBi110:
PSTN Line
For all other models:
SP1 Service
ToneOnPrimaryServiceDown
(OBi202 and OBi302 only) Select the tone to play in place dial tone when the service
corresponding to the Primary Line is out-of-service.
Choose from:
- No Tone
- Normal Dial Tone
- SIT Tone 1
- SIT Tone 2
- SIT Tone 3
- SIT Tone 4
Note: Option not available on the OBi100/OBi110
Normal Dial Tone
Ringer
RingFrequency Ringer frequency in Hz (14 - 68) to apply to the PHONE
port when ringing 20
RingVoltage Peak ringer voltage in volts (55 - 82) to apply to the
PHONE port when ringing 70
RingWaveform Ringer waveform to apply to the PHONE port when
ringing. Choices are Sinusoidal or Trapezoidal Sinusoidal
InterleavedRing When both phone ports are ringing, enabling this option No