Obihai OBi100, Руководство администратора

Страница: 128 / 220

Copyright 2010-2013 Obihai Technology, Inc. 128
like this: {0:ph,ph2} which forks to ring both
PHONE1 and PHONE2. In general you can have up
to 4 destinations is a forking rule. On the other
hand, you must not specify more than one
destination number on the OBi100 and OBi110.
{([1-9]x?*(Mpli)):pp},
{0:ph.ph2},
{(<**1:>(Msp1)):sp1},
{(<**2:>(Msp2)):sp2},
{(<**3:>(Msp3)):sp3},
{(<**4:>(Msp4)):sp4},
{(<**70:>(Mli)):li},
{(<**82:>(Mbt2)):bt2},
{(<**81:>(Mbt)):bt},
{(<**8:>(Mbt)):bt},
{(<**9:>(Mpp)):pp},
{(Mpli):pli}
For OBi:200/OBi300:
{([1-9]x?*(Mpli)):pp},
{0:ph},
{(<**1:>(Msp1)):sp1},
{(<**2:>(Msp2)):sp2},
{(<**3:>(Msp3)):sp3},
{(<**4:>(Msp4)):sp4},
{(<**70:>(Mli)):li},
{(<**82:>(Mbt2)):bt2},
{(<**81:>(Mbt)):bt},
{(<**8:>(Mbt)):bt},
{(<**9:>(Mpp)):pp},
{(Mpli):pli}
PrimaryLine By primary line we mean the service that does not
require any access code prefix (such as **1 or **9)
when dialing; it is the default service to be used for
making the call when no explicit access code prefix
is entered. This parameter indicates to the device
which voice service is considered as the primary line
when dialing out via the Auto Attendant. Available
choices are:
SP1 Service (
code = sp1 )
SP2 Service ( code = sp2 )
SP3 Service (code = sp3)
SP4 Service (code = sp4)
OBiTALK Service (
code = pp1 )
PSTN Line ( code=li1 )
1
Trunk Group 1 (code= tg1 )
The OBi device process the parameter by
substituting of the occurrences of
pli and (Mpli) in
DigitMap and OutboundCallRoute with the
corresponding
code and (Mcode) . For example, if
PrimaryLine = PSTN Line, then all occurrences of pli
and (Mpli) will be substituted internally with li1 and
(Mli1) respectively
PSTN Line
AnswerDelay Period of time in milliseconds that the AA will wait
before answering an incoming call that has been
routed to it 4000
NumberOnNoInput In the case that the caller does not enter any option
from the top level menu after the menu has been
announced for 3 times, the AA directs the caller to
the number specified in this parameter. If this
number is not specified, the AA simply terminates
the current call. 0
Note: According to the
default DigitMap and
OutboundCallRoute, calling
0 means calling the PHONE
port
UsePIN Enable the use of PIN to authenticate callers when No