O2 Xda Venn, Руководство пользователя

Страница: 25 / 136

25
Battery Usage
The battery is not charged when the phone is first purchased – fully charge the battery before first use.
The battery will charge faster if the phone is switched off while charging. Battery operating time gradually
decreases over time. If the battery fails to perform normally, you may need to replace it.
Battery Installation
Be sure to use only the batteries that have been provided
with the phone. Installation is easier if you have placed
the phone on a flat surface.
1. Place the battery on the back of the handset
and slide into place.
2. Push the battery down until it locks into place.
Battery Removal
Again, place the Xda Venn on a flat surface and use an even, steady pressure when removing the battery.
1. Pull the release latch upwards, lift up the battery.
2. Remove the battery from the handset.
NOTE: If the battery is not correctly placed in the compartment, the handset will not turn on and/or the
battery may detach during use.
Battery Charging
Make sure the battery is properly installed in the handset. Take care, as usual, when using a standard power
socket.
Power Connection
1. Plug the AC Charger into a standard socket.
2. Plug the other end of the AC Charger into the upper right side
of your phone. The battery must be installed in the phone.
Make sure you align the connectors correctly. If you do not,
the charging connector on the phone will be damaged and the
phone will not charge.
Power-Off Charging
• The Xda Venn will enter ‘power-off charging mode’ automatically
if you charge it with the phone switched off.
• The phone’s current charging status will be displayed (complete, 0% ~ 95% and error )
• Backlight will turn on for 5 seconds if you press any key except [
].
• Press [ ] if you want to exit ‘power-off charging mode’ and turn on.