manualshive.com logo in svg

NXP Semiconductors MPC5605BK, Справочное руководство

Поделиться
Скачать
NXP Semiconductors MPC5605BK Скачать руководство пользователя страница 47

Chapter 2 Introduction

MPC5606BK Microcontroller Reference Manual, Rev. 2

Freescale Semiconductor

47

 

— Two receiver wakeup methods

MPC5606BK devices include two functionally-different LINFlex controller types. These are 
distinguished in the documentation by the abbreviations “LINFlex” and “LINFlexD”. The latter name 
represents the DMA support available on this controller type. The MPC5606BK devices combine these 
two types to provide as many as eight modules supporting the LINFlex protocol. 

Table 2-6

 shows the 

module (instance) numbers and the corresponding functional controller type.

2.4.21

JTAG Controller (JTAGC)

JTAG features the following:

•

JTAG low pin count interface (IEEE 1149.1) test access port (TAP) interface

•

Backward compatible to standard JTAG IEEE 1149.1-2001 test access port (TAP) interface

•

Supports boundary scan testing

•

All JTAG pins reusable in application as standard IOs

2.5

 

Developer support

The MPC5606BK MCU tools and third-party developers are similar to those used for the Freescale 
MPC5500 product family, offering a widespread, established network of tool and software vendors.

The following development support will be available:

•

Automotive evaluation boards (EVB) featuring CAN, LIN interfaces, and more

•

Compilers

•

Debuggers

•

JTAG interface

The following software support will be available:

•

OSEK solutions will be available from multiple third parties

•

CAN and LIN drivers

•

AutoSAR package

Table 2-6. LINFlex numbering and naming

Module numbers

Module version

0 and 1

LINFlexD

2–7

LINFlex

Содержание MPC5605BK





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды