BURNER HEAD DETAILS & ELECTRODE SETTING ………………………………………………………………
24
FUEL PUMPS
- SUNTEC ………………………………………………………………………………………
25
- HP TECHNIK …………………………………………………………………………………
26
FLAME FAILURE & SEQUENCE CONTROL & MODULATING CONTROL SYSTEMS …………………………
27
BURNER OIL NOZZLE …………………………………………………………………………………………….. 31
SERVICE & REPLACEMENT ………………………………………………………………………………………….
31
APPENDIX
Burner Performance Graph
…………………………………………………………………………………..
32
Commissioning Sheet
…………………………………………………………………………………..
33
IMPORTANT – SAFETY
It is essential that the following instructions and adjustments are carried out by qualified engineers that are
experienced in forced draught gas and pressure jet oil burner commissioning. In the UK it is a legal
requirement that these engineers should also be CORGI registered. Nu-way cannot be held responsible
for any consequential damage, loss or personal injury as a result of customers failing to follow these
instructions, or as a result of misuse. Your attention is drawn to the
Emergency Instructions
on Page 14.
EUROPEAN BOILER EFFICIENCY DIRECTIVE (B.E.D.)
All burners and boiler bodies marketed separately should comply with EN 267 (oil burners) or EN676 (gas
burners) and EN303-1 (boiler bodies).
Burner adjustments must be made in accordance with boiler manufacturer’s instructions, and these must
include flue gas temperatures, average water temperature, and CO
2
or O
2
concentration.
MOL 3400 & MOL 4100 Issue 2 08/08
Page 2
