NPK M35G, Инструкция по эксплуатации

Страница: 80 / 118

-
80
-
JAW SET INTERCHANGE
DETACHMENT OF THE EYE AND FORKED JAWS FROM THE
CYLINDER SUB-ASSEMBLIES
3. Manually remove the cylinder lock plates.
4. Remove the cylinder pins (c9).
Once the cylinder jaw pins are removed, the jaws may rock forward.
REMOVAL OF THE JAW SET ASSEMBLY FROM THE MAIN
FRAME
5. Using the excavator, position the jaw
set on a sturdy pallet. The forked jaw
(FS) must be resting on the top
surface of the pallet. Prop the back of
the forked jaw up, using a block of
wood (t20) as shown.
(This is to allow
for clearance when unhooking the jaw
set from the processor frame.)
6. Remove the four retaining pin bolts
(c42) and the four lock plates (c43)
from the cylinder pin cover plates
(c36).