NPK M35G, Инструкция по эксплуатации

Страница: 78 / 118

-
78
-
JAW SET INTERCHANGE
TOOLS AND SUPPLIES
The following are tools and supplies needed to properly change jaw sets.
 A sturdy pallet (wood or metal).
 Three wood blocks, 4” x 4” x 24” (100 x 100 x 610 mm) or larger.
 12 mm hex key socket.
 17 mm hex key socket (available as NPK part no. 35004600).
 12 mm hex key wrench (available as NPK part no. 25004120).
 17 mm hex key wrench (available as NPK part no. 25004170).
 1/2" drive breaker bar.
 3/4" or 1/2" air gun (if available) .
 Brass drift pin.
 Dead blow hammer or non-metallic rod or hammer (such as nylon or wood).
 Qty. 2 - #20 JIC steel caps.
If removed jaw set is to be stored, it is recommended to:
 Grease.
 Set on a wood pallet.

Use a protective tarp for outside storage.