Novell EDIRECTORY 8.8 - GUIDE Скачать руководство пользователя страница 513 | Manualshive

Страница: 513 / 574

Novell EDIRECTORY 8.8 - GUIDE Скачать руководство пользователя страница 513

514

Novell eDirectory 8.8 Administration Guide

no

vd

ocx (

E

NU)

01

F

ebr
ua

ry
200
6

Replaced the storage device that
contained eDirectory on an
operating system that is not
NetWare

1. Install the operating system if necessary.

2. Restore the file system on disk partitions that were

affected by the storage device change.

3. Install eDirectory on the new storage device, in a new

temporary tree.

4. Restore eDirectory from backup (which puts it back into

the original tree), specifying the option to keep it closed
and locked after the restore. Use a command like the
following:
restore -r -f

backup_filename_and_path

-l

log_filename_and_path

-e

Use the -e option if you backed up NICI files. Add the -u
option if you backed up files listed in an include file.

5. Unlock the eDirectory database.

6. If you restored NICI security files, after completing the

restore, restart the server to reinitialize the security
system.

7. Check to see whether the server responds as usual.

Use ConsoleOne

®

to check the server and its

synchronization. Make sure that login scripts and
printing work correctly.

8. If you were using roll-forward logging on this server,

make sure you re-create the roll-forward logs
configuration after the restore is complete. After turning
on the roll-forward logs, you must also do a new full
backup.

The settings are reset to the default after a restore,
which means roll-forward logging is turned off. The new
full backup is necessary so that you are prepared for
any failures that might occur before the next unattended
full backup is scheduled to take place.

If you…

Perform These General Steps

«
...
511
512
513
514
515
...
»

Содержание EDIRECTORY 8.8 - GUIDE































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов