Novell EDIRECTORY 8.8 - GUIDE Скачать руководство пользователя страница 192 | Manualshive

Страница: 192 / 574

Novell EDIRECTORY 8.8 - GUIDE Скачать руководство пользователя страница 192

192

Novell eDirectory 8.8 Administration Guide

no

vd

ocx (

E

NU)

01

F

ebr
ua

ry
200
6

enable any of these parameters or to add any parameters, simply delete the # character from the
beginning of the line.

ndsimonhealth

The ndsimonhealth configuration file lets you modify default settings for the Agent Health page.
You can enable or disable Agent Health options, set reporting levels and ranges for options, and set
server reporting levels.

There are three types of options you can set in the ndsimonhealth configuration file.

• Enable/disable only options

To disable an option, remove the pound sign (#) from in front of the option and replace any
levels listed after the colon (:) with OFF. To set reporting levels of these options, remove the #
character from in front of the option and add a reporting level after the colon. Valid levels are
WARN, MARGINAL, and SUSPECT. For these options, you can input only one reporting
level.

• General options that take a range of settings

These options can be enabled and disabled or have their reporting level set, as well as the
ranges for those reporting levels.
To set the reporting level for any of these options, use the option name followed by -active: and
the reporting levels you want. For example, to set time_delta active, add the following line to
the configuration file:

time_delta-active: WARN

To set time_delta inactive, add the following line to the configuration file:

time_delta-active: OFF

When entering ranges, the specified range is the range that this reporting level should not be
displayed for.
See the time_delta example below for an example of how to set an option to be active for all
three reporting levels and how to set the ranges. In this example, anything not in the range -2 to
2 is at least marginal, anything not in the range -5 to 5 is at least suspect, and anything not in the
range -10 to 10 is a warning.

time_delta-active: WARN | SUSPECT | MARGINAL
time_delta-Min_Warn: -10
time_delta-Min_Suspect: -5
time_delta-Min_Marginal:   -2
time_delta-Max_Marginal:    2
time_delta-Max_Suspect:   5
time_delta-Max_Warn:    10

For help on any of these options, enter the following URL in iMonitor:

Server

Configuration File

NetWare

sys:\system\ndsimonhealth.ini

Windows

install directory

\novell\NDS\ndsimonhealth.ini

Linux, Solaris, AIX, and HP-UX

/etc/opt/novell/eDirectory/conf/
ndsimonhealth.conf

«
...
190
191
192
193
194
...
»

Содержание EDIRECTORY 8.8 - GUIDE































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов