manualshive.com logo in svg

Novell EDIRECTORY 8.8 - GUIDE, Руководство пользователя, Страница: 396 / 574

Поделиться
Скачать
Novell EDIRECTORY 8.8 - GUIDE Скачать руководство пользователя страница 396

Backing Up and Restoring Novell eDirectory

397

no

vd

ocx (

E

NU)

  

01

 F

ebr
ua

ry 
200
6

•

“Restoring from Backup Files with iManager” on page 401

14.5.1  Backing Up Manually with iManager

Use Backup in iManager in a browser to back up data from an eDirectory database to one or more 
files on the server where the backup is being performed. You can do a full or incremental backup. 

The backup files contain information necessary to restore eDirectory to the state it was in at the time 
of the backup. The results of the backup process are written to the log file you specify.

Backups performed using iManager are hot continuous backups, meaning that the eDirectory 
database is open and accessible during the process, and you still get a complete backup that is a 
snapshot of the moment when the backup began.

Keep in mind that to do a cold backup (a backup with the database closed) or an unattended backup 
you must use the eMBox Client. See 

“Backing Up Manually with the eMBox Client” on page 404

 

and 

“Doing Unattended Backups, Using a Batch File with the eMBox Client” on page 407

.

Before performing backup and restore tasks, review 

Section 14.1, “Checklist for Backing Up 

eDirectory,” on page 374

 for an overview of the issues involved in planning an effective eDirectory 

backup strategy.

Prerequisites

‰

Decide which additional files you want to back up along with eDirectory and create an include 
file if necessary. 

You can back up NICI files and stream files by checking the check boxes for those options in 
iManager. We recommend that you always back up NICI files.

If you want to include other files, such as the autoexec.ncf file, you must put the paths and 
filenames in an include file. Separate the paths and filenames with a semicolon and don't 
include hard returns or spaces. (For example, 

sys:\system\autoexec.ncf;sys:\etc\hosts;

)

‰

Plan to do a file system backup shortly after doing the eDirectory backup, if you need to place 
the eDirectory backup files safely on tape. (The Backup eMTool only places them on the 
server.)

TIP: 

To make it easier to move the backup files to another storage device, you can specify the 

maximum size of eDirectory backup files. You can also use a third-party file compression tool 
on the files after they are created. They compress approximately 80%.

‰

If you are planning to use roll-forward logs for this server, make sure they are turned on before 
a backup is made. 
You must turn on roll-forward logging for servers that participate in a replica ring. If you don't, 
when you try to restore from your backup files you will get errors and the database will not 
open. 
For more information on roll-forward logs, see 

Section 14.3, “Using Roll-Forward Logs,” on 

page 389

. For how to turn them on, see 

“Configuring Roll-Forward Logs with iManager” on 

page 399

.

‰

For multiple-server trees, you should upgrade all the servers that share replicas with this server 
to eDirectory 8.5 or later. 

Содержание EDIRECTORY 8.8 - GUIDE































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов