Novell EDIRECTORY 8.8 - GUIDE Скачать руководство пользователя страница 354 | Manualshive

Страница: 354 / 574

Novell EDIRECTORY 8.8 - GUIDE Скачать руководство пользователя страница 354

Configuring LDAP Services for Novell eDirectory

355

no

vd

ocx (

E

NU)

01

F

ebr
ua

ry
200
6

The new option is a value (setting) held on the ldapDefaultReferralBehavior attribute on the LDAP
Server and LDAP Group objects. The value is an integer which is a bitmask of the following bits.

If the LDAP server is configured to Always Refer for the operation, and if any of the conditions
listed are met and the corresponding value is set, the default referral is returned.

Setting Referrals for Search Operations

Functionality interacted to LDAP for eDirectory 8.7 causes referrals to behave slightly differently
than with earlier versions of eDirectory and NDS. The differences influence the way you configure
LDAP Services.

You can configure the eDirectory LDAP server to return referrals to other eDirectory servers within
the eDirectory tree. By default, the LDAP server chains all operations to other eDirectory servers on
behalf of the user, and referrals are never returned.

Prior to eDirectory 8.7, the referral options only existed as settings on the LDAP Group object. With
eDirectory 8.8 you can set these options on the LDAP Server object also. Any setting on the LDAP
Server object overrides that setting on the LDAP Group object.

You set the Referral Option by manipulating the ldapSearchReferralOption attribute. Previous to
LDAP Services for eDirectory 8.7, you could set this attribute to the following options:

•

“Prefer Chaining” on page 357

(the default option)

•

“Prefer Referrals” on page 357

•

“Always Refer” on page 358

These referral options apply only to referring and chaining to other eDirectory servers within the
eDirectory tree. These configuration settings don’t control referrals that come from a
nonauthoritative partition. Therefore, even though you select an option (for example, Always Chain)
from the Referral Options drop-down list, referrals will still come from nonauthoritative partitions to
other servers.

To support superior referrals to non-eDirectory DSAs, LDAP Services for eDirectory 8.7.a has an
Always Chain option. See

“Always Chain” on page 356

.

Bits

Value

0x00000001

The base DN is not found

0x00000002

The base DN is on an unavailable eDirectory server

0x00000004

An entry in the search scope is on an unavailable eDirectory
server

«
...
352
353
354
355
356
...
»

Содержание EDIRECTORY 8.8 - GUIDE































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов