manualshive.com logo in svg

Novell EDIRECTORY 8.8 - GUIDE, Руководство пользователя, Страница: 149 / 574

Поделиться
Скачать
Novell EDIRECTORY 8.8 - GUIDE Скачать руководство пользователя страница 149

Novell eDirectory Management Utilities

149

no

vd

ocx (

E

NU)

  

01

 F

ebr
ua

ry 
200
6

• Load information into eDirectory using a template
• Schema imports

The Novell Import Convert Export Wizard is installed as part of Novell iManager. Both a Win32* 
version 

(ice.exe

) and a NetWare

®

 version (

ice.nlm

) are included in the installation. On 

Linux, Solaris, AIX, and HP-UX systems, the Import/Export utility is included in the 

NOVLice

 

package.

Novell Import Conversion Export Syntax

The Novell Import Conversion Export utility is launched with the following syntax:

ice 

general_options

-S[LDIF | LDAP | DELIM | LOAD | SCH] 

source_options

-D[LDIF | LDAP | DELIM] 

destination_options

or when using the schema cache:

ice -C 

schema_options

-S[LDIF | LDAP] 

source_options

-D[LDIF | LDAP] 

destination_options

When performing an update using the schema cache, an LDIF file is not a valid destination.

General options are optional and must come before any source or destination options. The -S 
(source) and -D (destination) handler sections can be placed in any order. 

The following is a list of the available source and destination handlers:

•

“LDIF Source Handler Options” on page 151

•

“LDIF Destination Handler Options” on page 152

•

“LDAP Source Handler Options” on page 152

•

“LDAP Destination Handler Options” on page 154

•

“DELIM Source Handler Options” on page 156

•

“DELIM Destination Handler Options” on page 157

•

“SCH Source Handler Options” on page 157

•

“LOAD Source Handler Options” on page 158

General Options

General options affect the overall processing of the Novell Import Conversion Export engine.

Option

Description

-C

Specifies that you are using the schema cache to perform schema compare and 
update. 

-l 

log_file

Specifies a filename where output messages (including error messages) are 
logged. If this option is not used, error messages are sent to ice.log.

If you omit this option on Linux, Solaris, AIX, or HP-UX systems, error messages 
will not be logged.

Содержание EDIRECTORY 8.8 - GUIDE































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов