Novell EDIRECTORY 8.8 - GUIDE Скачать руководство пользователя страница 502 | Manualshive

Страница: 502 / 574

Novell EDIRECTORY 8.8 - GUIDE Скачать руководство пользователя страница 502

Maintaining Novell eDirectory

503

no

vd

ocx (

E

NU)

01

F

ebr
ua

ry
200
6

Tuning the Solaris Kernel

To optimize the performance of eDirectory on Solaris, set the following kernel variables in the /etc/
system:

Tuning the Solaris Network

You can enhance LDAP search performance using the Solaris ndd command. The following
command syntax allows you to analyze and modify tunable parameters that affect networking
operation and behavior:

ndd -set /dev/tcp

variable_name

variable_value

The recommended values for the variables are listed in the following table:

Fine-Tuning the Solaris File System

Novell eDirectory performance on Solaris can be improved if the Solaris file system is adequately
tuned, especially for bulk loading data into the directory. File system tuning for eDirectory is similar
to tuning for a database. See the

Sunworld* Web site (http://www.sunworld.com/sunworldonline)

for more information on the Solaris file system.

Parameter

Description

set maxphys=1048576

Maximum number of bytes that can be transferred
per SCSI transaction.

set md_maxphys=1048576

Maximum number of bytes that can be transferred
per SCSI transaction if you are using disksuite,
vol_maxio, or vxvm.

set ufs:ufs_LW=

1/128_of_available_memory

Barrier for the number of outstanding bytes on a
single file below which the condition variable on
which other sleeping processes are toggled.

set ufs:ufs_HW=

1/64_of_available_memory

Number of bytes outstanding on a single fail barrier
value.

ctcp:

tcp_conn_hash_size

=8192

Number of connection hash entries that are allocated
to quickly locate the kernel data structures that are
associated with TCP connection. (This can be
increased to 262144, based on the number of LDAP
clients.)

Parameter

Description

tcp_conn_req_max_q: 1024

The “q” stands for queue, which is the completed socket
holding pen where sockets remain until the application issues
accept.

tcp_time_wait_interval: 60000

Sets (in this case lowers) the time wait interval.

tcp_xmit_hiwat: 64000

tcp_xmit_lowat: 64000

Adjusts the minimum and maximum TCP send window size.

tcp_slow_start_initial: 2

Adjusts the number of first transmission packets from 1 to 2.

«
...
500
501
502
503
504
...
»

Содержание EDIRECTORY 8.8 - GUIDE































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов