manualshive.com logo in svg

Novell EDIRECTORY 8.8 - GUIDE, Руководство пользователя, Страница: 486 / 574

Поделиться
Скачать
Novell EDIRECTORY 8.8 - GUIDE Скачать руководство пользователя страница 486

SNMP Support for Novell eDirectory

487

no

vd

ocx (

E

NU)

  

01

 F

ebr
ua

ry 
200
6

ndsProtoIfOps

ndsDbCfgDynamicCacheAdjustPercent 

Information on the Dynamic Cache Adjust percentage 
parameter of available memory.

ndsDbCfgDynamicCacheAdjustMin 

Information on the Dynamic Cache Adjust Minimum 
value parameter. This is cache size constraint values in 
KB.

ndsDbCfgDynamicCacheAdjustMinToLeave  Information on the Dynamic Cache Adjust Minimum 

value parameter in KB that is to be subtracted from the 
total available memory in KB.

ndsDbCfgHardLimitCacheAdjust 

Information on whether Hard Limit Cache Adjust is on or 
off. 0 = off 1 = on

ndsDbCfgHardLimitCacheAdjustMax 

Information on the cache maximum size in KB. This is a 
hard limit parameter.

ndsDbCfgBlockCachePercent Information on the block cache percentage.

ndsDbCfgCacheAdjustInterval Information 

on 

the cache adjust interval in seconds.

ndsDbCfgCacheCleanupInterval Information 

on 

the cache cleanup interval in seconds.

ndsDbCfgPermanentSettings 

Information on whether Permanent Settings is on or off. 0 
= off 1 = on

Managed Objects in Directory

Description

ndsProtoIfSrvApplIndex

An index to uniquely identify the eDirectory Server Application. 

ndsProtoIfIndex

An index to uniquely identify an entry corresponding to an 
eDirectory Server protocol interface. 

ndsProtoIfDescription

Information on the port being used by the DS protocol 
interface.

ndsProtoIfUnauthBinds

Number of unauthenticated/anonymous bind requests 
received.

ndsProtoIfSimpleAuthBinds

Number of bind requests that were authenticated using simple 
authentication procedures where the password is sent over the 
wire in encrypted or clear text format.

ndsProtoIfStrongAuthBinds

Number of bind requests that were authenticated using SASL 
and X.500 strong authentication procedures. This includes the 
binds that were authenticated using external authentication 
procedures.

ndsProtoIfBindSecurityErrors

Number of bind requests that have been rejected due to 
inappropriate authentication or invalid credentials.

ndsProtoIfInOps

Number of requests received from DUAs or other eDirectory 
servers.

ndsProtoIfReadOps

Number of read requests received.

ndsProtoIfCompareOps

Number of compare requests received.

Managed Objects in Directory

Description

Содержание EDIRECTORY 8.8 - GUIDE































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов