manualshive.com logo in svg

Novell EDIRECTORY 8.8 - GUIDE, Руководство пользователя, Страница: 151 / 574

Поделиться
Скачать
Novell EDIRECTORY 8.8 - GUIDE Скачать руководство пользователя страница 151

Novell eDirectory Management Utilities

151

no

vd

ocx (

E

NU)

  

01

 F

ebr
ua

ry 
200
6

Destination Handler Options

The destination handler option (-D) specifies the destination of the export data. Only one of the 
following can be specified on the command line.

LDIF Source Handler Options

The LDIF source handler reads data from an LDIF file, then sends it to the Novell Import 
Conversion Export engine.

-SDELIM

Specifies that the source is a comma-delimited data file.

For a list of supported DELIM options, see 

“DELIM Source Handler Options” on 

page 156

.

-SSCH 

Specifies that the source is a schema file.

For a list of supported SCH options, see 

“SCH Source Handler Options” on 

page 157

-SLOAD

Specifies that the source is a DirLoad template.

For a list of supported LOAD options, see 

“LOAD Source Handler Options” on 

page 158

.

Option

Description

-DLDIF

Specifies that the destination is an LDIF file. 

For a list of supported options, see 

“LDIF Destination Handler Options” on 

page 152

.

-DLDAP

Specifies that the destination is an LDAP server.

For a list of supported options, see 

“LDAP Destination Handler Options” on 

page 154

.

-DDELIM

Specifies that the destination is a comma-delimited file.

For a list of supported options, see 

“DELIM Destination Handler Options” on 

page 157

.

Option

Description

-f 

LDIF_file

Specifies a filename containing LDIF records read by the LDIF source handler and 
sent to the engine.

If you omit this option on Linux, Solaris, AIX, or HP-UX systems, the input will be 
taken from stdin.

-a

If the records in the LDIF file are content records (that is, they contain no 
changetypes), they will be treated as records with a changetype of add.

-c

Prevents the LDIF source handler from stopping on errors. This includes errors on 
parsing LDIF and errors sent back from the destination handler. When this option is 
set and an error occurs, the LDIF source handler reports the error, finds the next 
record in the LDIF file, then continues.

Option

Description

Содержание EDIRECTORY 8.8 - GUIDE































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов