Novell EDIRECTORY 8.8 - GUIDE Скачать руководство пользователя страница 450

Страница: 450 / 574

SNMP Support for Novell eDirectory

451

ocx (

NU)

ebr
ua

ry
200
6

(Conditional) If you selected

Login

, you are prompted for the login information. Enter the

username and password.

Type

in the

Remember Password

field to remember the password. When you start the

subagent the next time, you are not prompted for the password. Type N to enter the password
when the subagent is started the next time.

Press Enter after entering Y or N.

Press the function key F10 to log in to the tree.

Press Enter to continue.

The subagent is started.

NOTE:

If INTERACTION is set to ON in the

sys:\etc\ndssnmp.cfg

file, this dialog box is

displayed. If INTERACTION is OFF, it is not displayed.

Windows

•

“Configuring the Master Agent” on page 451

•

“Starting the Master Agent” on page 451

•

“Stopping the Master Agent” on page 452

•

“Starting the Subagent” on page 452

Configuring the Master Agent

NOTE:

The SNMP master agent should be installed before eDirectory is installed. Refer to

SNMP

Installation on Windows (http://www.microsoft.com/technet/treeview/default.asp?url=/TechNet/
prodtechnol/winntas/maintain/featusability/getting.asp)

for more details.

In the Microsoft SNMP Properties dialog box, click the

Agent

tab.

Enter the Contact and Location information.

Click the Traps, then enter the Community Name and Trap destination details.

Enter the Community Name, then click

Add

Enter the IP address or hostname of the destination computer that traps are generated for.

Click

Add

to add the IP address or hostname.

Enable the

Allow Service to Interact with Desktop

option.

If it is not enabled, you will be unable to connect to SNMP on Windows.

• On Windows 2000: Click

Start

Settings

Control Panel

Administrative Tools

Services

. Then right-click SNMP and select

Properties

. At the

Log On

tab, select the

Allow Service to Interact with Desktop

option.

Starting the Master Agent

To start the master agent, do the following:

Click

Start

Settings

Control Panel

Administrative Tools

Services

SNMP

Start

Enter the following at the command prompt:

Net start SNMP

Содержание EDIRECTORY 8.8 - GUIDE































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание EDIRECTORY 8.8 - GUIDE

Отзывы:

Novell EDIRECTORY 8.8 - GUIDE, Руководство пользователя, Страница: 450 / 574

Результаты поиска

Содержание EDIRECTORY 8.8 - GUIDE

Отзывы: