manualshive.com logo in svg

Novell EDIRECTORY 8.8 - GUIDE, Руководство пользователя, Страница: 442 / 574

Поделиться
Скачать
Novell EDIRECTORY 8.8 - GUIDE Скачать руководство пользователя страница 442

SNMP Support for Novell eDirectory

443

no

vd

ocx (

E

NU)

  

01

 F

ebr
ua

ry 
200
6

Managed Devices 

A managed device is any device that has SNMP installed on it. A managed device could be a host, 
router, bridge, hub, etc. NMS can monitor and communicate with managed devices.

The information between the NMS and the managed device is transferred through two types of 
agents: subagent and master agent. 

Subagent 

The subagent gathers information about the managed device and passes the information to the 
master agent. 

Master Agent 

The master agent exchanges information between the various subagents and the NMS. The master 
agent runs on the same host machine as the subagents with which it communicates.

Management Information Base

SNMP exchanges network information in the form of protocol data units (PDUs). PDUs contain 
information about variables stored on the managed device. These variables are known as managed 
objects and have values and titles that are reported to the NMS. All managed objects are defined in 
the Management Information Base (MIB). MIB is a virtual database with a tree-like hierarchy. 

SNMP Network Management Protocol

The basic functions of SNMP are listed in the following table.

For more information about SNMP, refer to the following Web sites:

•

NET-SNMP Home Page (http://net-snmp.sourceforge.net)

•

SNMP FAQ (http://www.faqs.org/faqs/snmp-faq/part1)

•

RFC 1157 (http://www.ietf.org/rfc/rfc1157.txt)

•

SNMPLink (http://www.snmplink.org)

•

SNMPInfo (http://www.snmpinfo.com)

 

•

SNMP RFC Standard MIBs and Informative Links (http://www.wtcs.org/snmp4tpc/
snmp_rfc.htm)

•

RFC 2605 (http://ietf.org/rfc/rfc2605.txt?number=2605)

Function

Description

Get

Used by the manager to request information from an agent.

Get Next

Used by the manager to obtain information from an array or a table.

Get Response

Used by the queried agent to satisfy a request made by the manager.

Set

Used by the manager to modify the value of the variable which resides 
on the agent’s MIB. 

Trap

Used by the agent to notify the manager that a certain event has 
occurred.

Содержание EDIRECTORY 8.8 - GUIDE































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов