Northern Meditec Crius V6, Руководство оператора

Страница: 99 / 182

99 / 182
Allow do regularly cleaning for the monitor. To avoid dust or cleaning liquid through LEGI
interface enter the monitor, during the cleaning process should always make sure Nomoline
sampling tube is connected with the monitor. When cleaning the monitor, first use the damp cloth
that soaked in the highest concentration of 70% of medical alcohol to wipe clean the probe, at last,
with a dry lint-free cloth to dry it.
NOTE

Do not soak the ISA module in liquid or disinfect it;

Nomoline sampling tube it’s not a sterile component
；

Please do not do high-temperature high-pressure sterilization to the ISA
module(including the sampling tube)
，
otherwise it will damage the components.
7.5 Compensation
If this Ventilator need to configure mainstream CO2 module
（
IRMA CO2
），
or sidestream CO2
module
（
ISA CO2
），
need to do N2O and O2 compensation set to ensure the accuracy of CO2
monitoring.Operation see "5.14.3 O2 Compen " and "5.14.4 N2O Compen " instructions.
NOTE

If equipped IRMA CO2 or ISA CO2 module,in the monitored gas exist nitrous oxide or
O2, must do compensation settings for nitrous oxide and O2, otherwise it will cause the
CO2 monitoring result is not accurate.
7.6 About Masimo
Masimo holds the following patent relateding products described in this manual
：
SE519766
；
SE519779
；
SE523461
；
SE524086. Other patents pending.
Masimo holds the following licensed trademark;
Masimo IRMATM, Masimo ISATM, Masimo XTPTM+, Sigma Multigas TechnologyTM,
LEDTM, NomolineTM, IRMA EZ IntegratorTM, and PHASEIN Gas MasterTM are trademarks
of Masimo Corportation.