Northern Meditec Crius V6, Руководство оператора

Страница: 116 / 182

116 / 182
10.6.9 PEEP Too High
1. After the ventilator system starts up normally, connect a test lung to the ventilator
and start ventilation.
2. Set the PEEP high alarm limit to be greater than the current PEEP. Verify that the
[PEEP Too High ] alarm is activated.
10.6.10 PEEP Too Low
1. After the ventilator system starts up normally, connect a test lung to the ventilator
and start ventilation.
2. Set the PEEP low alarm limit to be greater than the current PEEP. Verify that the
[PEEP Too High ] alarm is activated.
10.6.11 Rtotal Too High
1. After the ventilator system starts up normally, connect a test lung to the ventilator
and start ventilation.
2. Set the Rtoatl high alarm limit to be greater than the current Rtotal. Verify that the
[Rtotal Too High ] alarm is activated.
10.6.12 Rtotal Too Low
1. After the ventilator system starts up normally, connect a test lung to the ventilator
and start ventilation.
2. Set the Rtotal low alarm limit to be greater than the current Rtotal. Verify that the
[Rtotal Too High ] alarm is activated.
10.6.13 Airway Obstructed
1. After the ventilator system starts up normally, connect a test lung to the ventilator
and set the ventilator to pressure mode to start ventilation.
2. Nip the inspiration tube with hands. Ensure the monitoring value of TVi is lower than
10 mL.
3. Verify that the [ Airway Obstructed? ] alarm is activated after several breathing cycles.
4. Loosen the inspiration tube and verify this alarm is reset automatically.
10.6.14 FiO2 Too High
1. Connect the ventilator to low-pressure O
2
supply.
2. Connect a test lung to the ventilator and start ventilation.