Northern Meditec Crius V6, Руководство оператора

Страница: 132 / 182

132 / 182
2. Align the guides on membrane fixing knob with the grooves of safety valve body. Insert
the membrane fixing knob, press it tightly and rotate it clockwise to the end position.
11.2.3 High Efficiency Particle Air (HEPA) Filter Assembly and
Dust Filter
A. HEPA filter B. Main unit air inlet grille C. Air intake dust filter

To disassemble the HEPA filter assembly and air intake dust filter:
1. Pull the two snaps on the main unit air inlet grilleto remove the grille.
2. Pull the snap on the HEPA filter to take it out. If it is necessary to remove the air
intake dust filter, pinch the dust filter with two fingers and take it out.

To install the HEPA filter assembly and air intake dust filter:
1. Align the HEPA filter with the corresponding slot, and push in the direction the
HEPA filter is installed.
2. Fasten the snap of the HEPA filter.
3. Check the snap on the HEPA filter and make sure it is fastened in place.
4. Install the main unit air inlet grille.
A
B