Northern Meditec Crius V6, Руководство оператора

Страница: 69 / 182

69 / 182
After System Check is completed, select [ Continue ] to enter Standby status. Then select
patient. If you select [Previous Patient ], set ventilation type in the accessed screen, and then
select [ StartVentilation ]. If you select [ New Patien ], set gender, [ Height ], ventilation type in
the accessed screen, and then select [ Start Ventilation ].
6.4 Ventilation Type
The ventilator provides two ventilation types: invasive and non-invasive.
WARNING

Check the alarm limit settings after switching over from NIV to Invasive.
6.4.1 Invasive Ventilation
Invasive ventilation means to ventilate the patient through manual airway (ET tube or Trach
tube). In invasive ventilation, all ventilation modes for adult
、
pediatric and neo patients are
enabled.
The leakage compensation in invasive ventilation: The upper limit of the leakage
compensation is 80% of the setting TV in volume control ventilation mode. If leakage exists,
the ventilator will increase the flow in pressure control ventilation mode for compensation.
The maximum flow can reach 210 L/min.
WARNING

Incorrect tube type, ID or compensate setting can endanger the patient. Make sure to set
them properly.
CAUTION

Do not attempt to use NIV on intubated patients.
6.4.2 Non-invasive Ventilation (NIV)
NIV means to ventilate the patient by using a nasal mask or facial mask instead of ET tube or
Trach tube. In NIV, the enabled ventilation modes include: PC-ACV,
PVC-ACV,PC-SIMV,PVC-SIMV,PC-Dual PAP, PC-APRV,CPAP/PSV and CPAP-VG in
adult, pediatric and neo patient ranges. The disabled ventilation modes in NIV appear grey.
The leakage compensation in non-invasive ventilation: The non-invasive ventilation is
enabled only in pressure control ventilation mode. The leakage compensation ability in
non-invasive ventilation is consistent with that in invasive ventilation and pressure control