Northern Meditec Crius V6, Руководство оператора

Страница: 85 / 182

85 / 182
PEEP Positive end-expiratory pressure.
Setting parameter Description
Plow Plow is the low pressure level at which the patient can
breathe
spontaneously.
Phigh Phigh is the high pressure level at which the patient can
spontaneously breathe and is an absolute value.
Pinsp
It is a relative value of the pressure, relative to PEEP.
Psupp
Pressure support level in pressure control mode. It is a relative value
relative to PEEP or Plow.
Tslope Controls pressure rise slope in pressure mode.
Tpause(%) Percent of gas delivery pause time in inspiratory time within
the inspiratory phase.
Rate The number of mechanically controlled breaths delivered to the
patient in one minute.
Thigh
Thigh is the time that the ventilator will hold the high pressure level.
Tlow
Tlow is the time that the ventilator will hold the low pressure level.
Tinsp
Inspiration Time in one breathing cycle.
Trigger Pressure trigger and flow trigger included. When the trigger level is
detected, the ventilator starts to enter the inspiratory phase.
Exp%
Inspiratory termination level. The ventilator is switched to the
expiratory phase when the inspiratory flow drops to
peak flow*Exp
％
.
Apnea ventilation
Turn on or turn off apnea ventilation function.
Apnea Rate Breathing frequency set in apnea ventilation mode.
Apnea Vt It is delivered tidal volume in apnea ventilation when volume
mode is selected for apnea ventilation.
Apnea Tinsp Inspiration time set in apnea ventilation mode.
Sigh Turn on or turn off sigh function.
Interval It is the setting value of number of cycles of every group of
sigh
ventilation.
Delta Vt
It is intermittent vt augmentation, added during the sigh cycle.
Delta Pinsp
It is intermittent pinsp augmentation, added during the sigh cycle.
Disable ATRC
Turn on or turn off ATRC function.
ET Tube Initiate ATRC function for ET tube.
Trach Tube Initiate ATRC function for Trach tube.
Tube I.D. It refers to the diameter of tracheal or ET tube.
Compliance
compensate Com
Turn on or turn off compliance compensate function.