Northern Meditec Crius V6, Руководство оператора

Страница: 145 / 182

145 / 182

The battery power is low, need to be charged immediately, otherwise the
device will automatically shut down.

Battery is not installed

The battery is normal, in a state of charge.
If the capacity of the internal battery is limited, the alarm [ Battery Low ] will be triggered. In
this case, apply external power to the ventilator.
12.8.1 Battery Performance Conditioning
Condition batteries when they are put into use for the first time. A complete battery
conditioning cycle is: uninterrupted charging, followed by uninterrupted discharging until the
ventilator shuts off, and then uninterrupted charging. Condition batteries regularly to
maintain their service lives.
NOTE

Condition batteries every time when they have been used for three months or when the
battery running time becomes noticeably short.

Over time and with the use of the battery, the actual battery capacity will decrease. For
an old battery, the battery full icon does not indicate that the battery capacity or battery
running time still meets the requirement specified. When conditioning batteries, replace
the battery when its running time becomes noticeably short.
Follow these steps to condition batteries:
1. Disconnect the patient from the ventilator and shut down the ventilator.
2. Connect the ventilator to the external power source and charge the batteries
uninterruptedly for at least 10 hours.
3. Disconnect the external power source. Allow the ventilator to operate on battery power
until the ventilator shuts off.
4. Re-connect the ventilator to the external power source and charge the batteries
uninterruptedly for at least 10 hours.
5. Battery conditioning is now completed.