Northern Meditec Crius V6, Руководство оператора

Страница: 70 / 182

70 / 182
ventilation mode.
CAUTION

Do not use NIV on patients with no or irregular spontaneous breaths. NIV is intended to
provide supplemental ventilatory support to patients with regular spontaneous breaths.

Do not attempt to use NIV on intubated patients.
6.4.3 Set Ventilation Type
To set ventilation type,
1 If the ventilator is in non-standby mode, press the [ Standby ] key and enter Standby
status after confirmation.
2. Select [Previous Patient ], [ New Patient ] in the Standby status.
3. Set ventilation type to [ Non-Invasive ] or [ Invasive ] on the accessed screen.
6.5 Ventilation Mode
NOTE

The ventilator does not generate subatmospheric airway pressure during exhalation.

The user can set high pressure alarm limit. If the pressure reaches the high pressure alarm
limit in the inspiratory phase, the “Paw Too High” high-level alarm is triggered. The
ventilator opens the expiration valve and switches to expiratory

phase until the airway pressure reaches the preset PEEP value. If the airway pressure
exceeds high pressure alarm limit+5 cmH2O
（
adjustable pressure limit
）
, the ventilator
opens the safety valve to release pressure, so that the airway pressure

falls to 3 cmH2O for continuous 0.5 s. Make sure to set high pressure alarm limit properly
to ensure patient safety.

The PC-ACV and PC- SIMV mode, VT
＞50ml,
are the recommended ventilation modes and
TV tidal volume for use with a closed-suction catheter. And the settings are decided by the
operator according to the patient situation.
6.5.1 Ventilation Mode and Parameter Setup
1. Ventilation mode setup field
Displays all the keys for setting up ventilation modes. The ventilator can be configured
with the following ventilation modes:
VC-ACV,PC-ACV,PVC-ACV,VC-SIMV,PC-SIMV,PVC-SIMV,PC-Dual
PAP,PC-APRV ,CPAP/PSV and CPAP-VG. Your machine may have different
ventilation modes.