Nortel 8300 Series страница 129 Скачать руководство пользователя

Страница: 129 / 220

Chapter 4 SMP log error messages

129

System Messaging Platform Reference Guide

Message

Password modified for user-exec mode

Severity

INFO

Description

This message indicates the password has been successfully changed for
user-exec mode.

Synopsis

N/A

Action

N/A

Message

PCAP File in PCMCIA is being over-written

Severity

INFO

Description

This message is generated when the PCAP autosave file in the PCMCIA is being
overwritten.

Synopsis

N/A

Action

Copy the file from the PCMCIA.

Message

Pcl size is unexpectedly large <value>

Severity

ERROR

Description

This message indicates that the specified ACG required more than 128 filters in
the hardware. This may result from an attempt to use rules with conditional
matching like greater, less, range, not-equal.

Synopsis

N/A

Action

Try to minimize the operators. If that does not hel, remove some ACEs from the
ACLs.

Message

PCMCIA is removed, Logging resumes on DRAM

Severity

ERROR

Description

This message indicates that the PCMCIA card is removed.

Synopsis

N/A

Action

N/A

Message

PD may be disconnected due to new power limit

Severity

WARNING

Description

This message indicates that the power limit was reduced which may cause the PD
to be disconnected due to lack of power.

Synopsis

N/A

Action

Check to see if any PD power has been disconnected and if necessary, re-assign
the power limit.

Содержание 8300 Series





























































































































































































































Результаты поиска

Содержание 8300 Series

Отзывы:

Похожие инструкции для 8300 Series

Бренды по названию

Популярные бренды

Nortel 8300 Series, Справочное руководство

Результаты поиска

Содержание 8300 Series

Отзывы:

Похожие инструкции для 8300 Series

Бренды по названию

Популярные бренды