Nortel 8300 Series, Справочное руководство

Страница: 118 / 220

118 Chapter 4 SMP log error messages
316806-C
Message NPAL_AddArp: could not create local host entry <ip addr> for ifindex <value>
Severity WARNING
Description This message indicates that an attempt to add the 32-bit host route failed in the
hardware. You need to add the 32-bit host route in hardware for each ARP entry.
Synopsis N/A
Action Contact the customer support team if the problem persists.
Message NPAL_AddArp: IP address of the ARP is NULL
Severity ERROR
Description This message indicates that you cannot add an ARP entry where the IP address
equals 0. Even if you are setting the default route to CPU or DROP, you can bind
the default route to special hardware next-hops without specifying the ARP IP
equals 0.
Synopsis N/A
Action N/A
Message NPAL_AddArp: ipv4CreateIpInterface failed for <ip addr> status <value>
Severity WARNING
Description This message indicates that an attempt to create the IP interface in hardware for
the local ARP failed.
Synopsis N/A
Action Contact the customer support team if the problem persists.
Message NPAL_AddArp: No more hardware space available in system for the arp
Severity ERROR
Description Currently, the Passport 8300 supports 2994 dynamic, static, and discard ARP
entries. If you attempt to add a number beyond this limit, this message displays to
show that the hardware has no more space for ARP entries.
Synopsis N/A
Action Either refrain from adding more ARP entries or delete some ARP entries to make
room for the new one.