Nortel 8300 Series, Справочное руководство

Страница: 12 / 220

12 Preface
316806-C
Table 1 lists the NNCLI command modes, the prompts for each mode, the
abbreviated name for each mode, and how to enter and exit each mode.
Accessing the NNCLI
When you first power up the Ethernet Routing Switch 8300, the default interface
is the Ethernet Routing Switch 8300 CLI. To switch from the CLI to the NNCLI,
you must change the NNCLI boot flag to
true
and save the boot configuration
file using the following commands:
Passport-8310:5# config boot flags nncli true
Passport-8310:5# save boot
Table 1
NNCLI command modes
Command mode Prompt
Mode
name Command/mode
to enter or exit mode
User EXEC Passport-8300:5> exec Default mode
when NNCLI is started
logout to exit
Privileged EXEC Passport-8300:5# privExec enable to enter
from User EXEC mode
disable to exit
to User EXEC mode
Global
configuration Passport-8300:5(config)# config configure to enter
from Privileged EXEC mode
exit to exit
to Privileged EXEC mode
Interface
configuration Passport-8300:5(config-if)# config-if interface to enter from
Global configuration mode
exit to exit
to Global configuration mode
Note: Prompts are expressed in this table using the format Passport-8300:5; however,
prompts returned from your switch typically reflect the specific chassis you use. For
example, if you use the 8310 chassis, the prompts use the format Passport-8310:5.
Prompts can be customized, also, using the NNCLI command
snmp-server name
< prompt > . Refer to Getting Started (316799-C) for more information.