manualshive.com logo in svg

Norgren NC-MP-4A4B-12DLA/AL1403, Руководство по эксплуатации, Страница: 6 / 72

Поделиться
Скачать
Norgren NC-MP-4A4B-12DLA/AL1403 Скачать руководство пользователя страница 6

OM-IO-Link Master.06

01/21

IO Link Master - PROFINET

NC-MP-4A4B-12DLA/AL1403

This device is “powered by ifm”. In all electronic interfaces, this device will 

appear as AL1403. All firmware and electronic files are provided by ifm.

2.4. Tampering with the unit

This document is intended for specialists. Specialists are people who, based on their relevant training and experience, can 

identify risks and avoiding potential hazards that may be caused during operation or maintenance of the product.
The document contains information about the correct handling of the product.

2.2. Required background knowledge

2.3. Safety symbols on the device

2. Safety instructions

Content

General 6
Required background knowledge 

6

Safety symbols on the device 

6

Tampering with the unit 

6

2.1. General

The plant manufacturer is responsible for the safety of the plant in which the device is installed.
If the device is used in a way that is not intended by the manufacturer, the 

protection supported by the device may be impaired.
Non-observance of the instructions, operation which is not in accordance with use as prescribed below, 

wrong installation or incorrect handling can affect the safety of operators and machinery.

 

‣

Observe these operating instructions.

 

‣

Adhere to the warning notes on the product.

General warning

Observe instructions in chapter „Electrical connection“ (→ 

Electrical connection

 (→ S. 12))!

WARNING

Tampering with the unit.

> In case of non-compliance:

• Possible effects on safety of operators and machinery
• Expiration of liability and warranty

 

‣

Do not open the devices!

 

‣

Do not insert any objects into the devices!

 

‣

Prevent metal foreign bodies from penetrating!

Содержание NC-MP-4A4B-12DLA/AL1403









































































Отзывы:

Нет отзывов