Norgren NC-MP-4A4B-12DLA/AL1403 Скачать руководство пользователя страница 15

Страница: 15 / 72

OM-IO-Link Master.015

01/21

IO Link Master - PROFINET

NC-MP-4A4B-12DLA/AL1403

This device is “powered by ifm”. In all electronic interfaces, this device will

appear as AL1403. All firmware and electronic files are provided by ifm.

‣

Disconnect power.

‣

Connect the device via M12 socket X31 to US and UA supplying 24 V DC each

(20...30 V SELV/PELV; according to IEC 61010-1, secondary circuit with maximum

30 V DC, supplied from mains circuit up to 300 V of overvoltage category II).

• Tightening torque: 0.6. 0.8 Nm
• Recommended maximum cable length: 25 m

‣

To connect the device, use L-coded M12 connectors with at least protection rating IP 65 / IP

66 / IP 67 (→

Accessories

(→ S. 51)).

Optional: Supply of additional devices (Daisy chain):

‣

Connect additional Master to M12 socket X32 of the NC-MP-4A4B-12DLA/AL1403 (Daisy-

chain function).

• Tightening torque: 0.6. 0.8 Nm
• Recommended maximum cable length: 25 m

‣

To connect the device, use L-coded M12 connectors with at least protection

rating IP 65 / IP 66 / IP 67 (→

Accessories

(→ S. 51)).

6.5. Connect the device

In case of cables that are longer than 25 m, take the voltage drop and the

necessary minimum supply voltage of 20 V into consideration!

CAUTION

Exceeding the maximum input current of 12 A

> Fire hazard

‣

Select IU and IA of the power supplies US and UA taking into account the derating

characteristics of the NC-MP-4A4B-12DLA/AL1403 (→

Derating behavior

(→ S. 54))!

NC-MP-4A4B-12DLA

6.5

Connect the device

► Disconnect power.
► Connect the device via M12 socket X31 to US and UA supplying 24

V DC each (20...30 V SELV/PELV; according to IEC 61010-1,

secondary circuit with maximum 30 V DC, supplied from mains

circuit up to 300 V of overvoltage category II).

Tightening torque: 0.6. 0.8 Nm

Recommended maximum cable length: 25 m

► To connect the device, use L-coded M12 connectors with at least

protection rating IP 65 / IP 66 / IP 67 (→

Accessories

(→ S.

)).

Optional: Supply of additional devices (Daisy chain):

► Connect additional Master to M12 socket X32 of the NC-MP-

4A4B-12DLA (Daisy-chain function).

Tightening torque: 0.6. 0.8 Nm

Recommended maximum cable length: 25 m

► To connect the device, use L-coded M12 connectors with at least

protection rating IP 65 / IP 66 / IP 67 (→

Accessories

(→ S.

)).

In case of cables that are longer than 25 m, take the voltage drop and the necessary minimum

supply voltage of 20 V into consideration!

CAUTION

Exceeding the maximum input current of 12 A

Fire hazard
Select I

and I

of the power supplies US and UA taking into account the derating

characteristics of the NC-MP-4A4B-12DLA (→

Derating behavior

(→ S.

))!

Содержание NC-MP-4A4B-12DLA/AL1403









































































Результаты поиска

Содержание NC-MP-4A4B-12DLA/AL1403

Отзывы:

Norgren NC-MP-4A4B-12DLA/AL1403, Руководство по эксплуатации, Страница: 15 / 72

Результаты поиска

Содержание NC-MP-4A4B-12DLA/AL1403

Отзывы: