Norgren NC-MP-4A4B-12DLA/AL1403 Скачать руководство пользователя страница 44 | Manualshive

Страница: 44 / 72

Norgren NC-MP-4A4B-12DLA/AL1403 Скачать руководство пользователя страница 44

OM-IO-Link Master.044

01/21

IO Link Master - PROFINET

NC-MP-4A4B-12DLA/AL1403

This device is “powered by ifm”. In all electronic interfaces, this device will

appear as AL1403. All firmware and electronic files are provided by ifm.

To exchange an IO-Link device:

Requirements

> The new IO-Link device is in the default state, as on delivery (factory settings).
> The new IO-Link device supports the IO-Link standard 1.1 or higher.

1. Store the parameter set of the old IO-Link device

‣

Create the following parameter of the IO-Link port

Device validation and data storage = [Type compatible V1.1 device with Restore]

‣

Save the changes on the device.

> The IO-Link master saves the parameter values of the connected IO-Link device in the data memory.

2. Exchange IO-Link device

‣

Disconnect the old IO-Link device from the IO-Link master.

‣

Connect the new IO-Link device with the same IO-Link port of the NC-MP-4A4B-12DLA/AL1403.

> The IO-Link master transfers the parameter values from the data memory to the new IO-Link device.
> The new IO-Link device works with the restored parameter set.

11.3. Exchanging the IO-Link device

«
...
42
43
44
45
46
...
»

Содержание NC-MP-4A4B-12DLA/AL1403









































































Отзывы:

Нет отзывов