Nordic ID Morphic, Руководство пользователя

Страница: 53 / 58

Nordic ID International Headquarters
Myllyojankatu 2A
FI-24100 SALO
FINLAND
Phone: +358 2 727 7700
Fax: +358 2 727 7720
Email: support@nordicid.com
www.nordicid.com
With the other slider adjustment applies to the backlight brightness when the Nordic ID Morphic is
in the ‘UserIdle’ power state (for more information on the system power states, see section’ Power
States’). In addition, both the sliders work as a switch. When you move the slider at the left side of
the trackbar, the keypad’s backlight property is disabled in the power state to which the slider
applies.
Once you have the ‘NID Backlight’ applet open there are those two sliders available on the ‘Misc’
tab.
Note that adjusting the backlight brightness the keypad backlight gives you immediate
feedback on the brightness level. This applies to both power states.
‘On’ Power State Brightness
To adjust the brightness of the keypad backlight in the ‘On’ power state, move the ‘ Full Power
Brightness ’ –slider
‘UserIdle’ Power State Brightness
To adjust the brightness of the keypad backlight in the ‘UserIdle’ power state, move the ‘ Power
Save Brightness ’ –slider
Related information:
ƒ
Section ‘ Making Your Configuration Settings Permanent ’
ƒ
Section ’Power States ’
ƒ Section ‘ Setting Timeout for Reduction in Screen Brightness’
ƒ Section ‘ Setting Timeout for Automatic Screen Turning-off ‘
6.4 Managing Touch Screen
6.4.1 Adjusting Double-tapping Sensitivity of Touch Screen
Before you begin, open the ‘Stylus’ control panel applet (see section ‘Control Panel’).
Be aware that double-tapping sensitivity is measured against the maximum time between two
screen-taps in succession. That is, quicker successive tapping than the longest period allowed
between consecutive taps functions as a double-tapping but the longer does not. In addition, the
time between successive tapping to be a double-tapping is limited to certain maximum value by the
system.
To adjust double-tapping sensitivity:
1. Select ‘ Double-Tap ‘ tab in the Stylus applet
2. Follow the instructions on the tab to adjust and to check the double-tapping sensitivity
3. Once you are satisfied with your adjustment, tap the ‘ OK ’ button on the title bar
Related information:
ƒ
Section ‘ Making Your Configuration Settings Permanent ’
6.4.2 Recalibrating Touch screen
It should be rare to recalibrate the touch screen. However, in some cases it could be reasonable to
recalibrate it, for example, if the touch screen has no good response to tapping it. Note that it is
normal that the response time to tapping some display object on the screen varies because it
correlates directly with the load of the processor unit.