5 Parameter
BU 0250 en-3021
157
Pos: 528 /Anleitungen/Elektronik/FU und Starter/5. Parameter/Parameterauflistung (P000 ...)/P700-P799/Parameter P735 – Drehzahl Drehgeber [SK 2xxE, SK 2xxE-FDS] @ 2\mod_1347348492128_388.docx @ 44440 @ @ 1
P735
Encoder speed
(encoder speed)
S
-9999 ... 9999 rpm
Displays the actual rotation speed supplied by the incremental encoder. For this, P301 must be
correctly set.
Pos: 529 /Anleitungen/Elektronik/FU und Starter/5. Parameter/Parameterauflistung (P000 ...)/P700-P799/Parameter P736 – Zwischenkreisspannung @ 0\mod_1328174969216_388.docx @ 13192 @ @ 1
P736
D.c. link voltage
(DC link voltage)
0 ... 1000 V DC
Displays the actual link voltage.
Pos: 530 /Anleitungen/Elektronik/FU und Starter/5. Parameter/Parameterauflistung (P000 ...)/P700-P799/Parameter P736 – Zwischenkreisspannung_Ergänzung Anzeige kleiner Wert bei 24V_Geräten [SK 2xxE] @ 5\mod_1397202429585_388.docx @ 126240 @ @ 1
Information
Display of untypical value
In devices with a separate 24 V supply, a small, non-typical value is displayed if
no mains
voltage
is present (e.g.: with 1~ 230
V devices: P736 ≈ 4
V). This value results from internal
measuring and testing routines, and is dependent upon measuring errors, offsets and signal
noise, for example.
Pos: 531 /Anleitungen/Elektronik/FU und Starter/5. Parameter/Parameterauflistung (P000 ...)/P700-P799/Parameter P737 – Aktuelle Auslastung Bremswiderstand @ 0\mod_1328175007763_388.docx @ 13215 @ @ 1
P737
Usage rate brakeres.
(Actual brake resistor usage rate)
0 ... 1000 %
This parameter provides information about the actual degree of modulation of the brake chopper
or the current utilisation of the braking resistor in generator mode.
If parameters P556 and P557 are correctly set, the utilisation related to P557, the resistor power,
is displayed.
If only P556 is correctly set (P557=0), the degree of modulation of the brake chopper is displayed.
Here, 100 means that the brake resistor is fully switched. On the other hand, 0 means that the
brake chopper is not active at present.
If P556 = 0 and P557 = 0, this parameter also provides information about the degree of
modulation of the brake chopper in the FI.
Pos: 532 /Anleitungen/Elektronik/FU und Starter/5. Parameter/Parameterauflistung (P000 ...)/P700-P799/Parameter P738 – Aktuelle Auslastung Motor [SK 1x0E, SK 2xxE, SK 2xxE-FDS] @ 2\mod_1346932207014_388.docx @ 43560 @ @ 1
P738
[-01]
[-02]
Motor usage rate
(current motor usage rate)
0 ... 1000 %
Shows the actual motor load. Basis for calculation is the motor data P203. The actually recorded
current is related to the nominal motor current.
[-01] =
in relation to I
N
(P203) of the motor
[-02] =
in relation to I
2
t monitoring,
"in relation to I
2
t monitoring"
(P535)
Pos: 533 /Anleitungen/Elektronik/FU und Starter/5. Parameter/Parameterauflistung (P000 ...)/P700-P799/Parameter P739 – Aktuelle Temperatur Kühlkörper [SK 1x0E, SK 2xxE, SK 2xxE-FDS] @ 2\mod_1346932207653_388.docx @ 43584 @ @ 1
P739
[-01]
...
[-03]
Heat sink temp.
(Current heat sink temperature)
-40 ... 150°C
[-01] = FI heat sink temperature
[-02] =
Internal temperature of the FI
[-03] = Temp. Motor KTY
, motor temperature via KTY, recording exclusively via IO extension,
setting in (P400) to function {30} "Motor temperature"
Pos: 534 /Allgemein/Allgemeingültige Module/---------Seitenumbruch kompakt --------- @ 13\mod_1476369695906_0.docx @ 2265495 @ @ 1
Содержание NORDAC LINK SK250E-FDS
Страница 211: ...Key word index BU 0250 en 3021 211...
Страница 212: ...6072502 3021...
